Access Piering Pty Ltd
Randwick City Council
Titania Street, Randwick, Sydney
An existing old brick retaining wall, up to 1.5m in height and built in the 1960’s, was showing signs of movement and instability. Cirtex Australia with the Engineer, Cardno developed a remedial wall stability solution using Platipus® anchoring systems that would minimise disturbance to the existing wall and eliminate the total dismantling, design and construction of a new retaining structure.
To stabilise the brick retaining wall, 53no. Platipus S6 anchor systems were driven up to 6m from the wall face, sufficiently past a potential slip/failure plane and into a sandy backfill. The anchor systems were spaced at a maximum distance of 1.75m along the wall and galvanised bespoke load plate arrangements were detailed by the Engineer and fabricated by the contractor to spread load at the wall face and conceal the top terminations of the anchor systems. Working or Design Loads of 10kN (1 ton) were immediately verified and tested on site. Design life requirement for the remedial works was 40+ years.
Coring through the brickwork took approximately 5 days to complete with the Platipus anchor installation and load testing taking 3-4 days. Once the anchor systems were driven to the required depth, they were tensioned and extended up to 200mm and ‘Proof’ loaded to 12kN (1.2 tons). All Platipus anchor systems were load locked against bespoke galvanized load plate arrangements with a small active load of 0.5kN.
The Platipus anchor system provided the following benefits and features: